FixVault
Home › Subaru › 2004 › Baja Base, Standard › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection (Fuel Systems) (H4SO U5 (PZEV)) › Engine Coolant Temperature Sensor › Removal

Engine Coolant Temperature Sensor: Removal

  1. Disconnect battery ground cable.
    Fig 1: Disconnecting Battery Ground Cable
    G00852113Courtesy of SUBARU OF AMERICA, INC.
  2. Remove air intake chamber. Refer to REMOVAL , Air Intake Chamber.
  3. Disconnect connector from engine coolant temperature sensor.
    Fig 2: Disconnecting Connector From Engine Coolant Temperature Sensor
    G00852114Courtesy of SUBARU OF AMERICA, INC.
  4. Remove engine coolant temperature sensor.
About FixVault