Turbo Models

Turbo models adopt a clutch system which is appropriate for increased clutch load.
The clutch control operates the release fork using the hydraulic pressure generated in the master cylinder when the clutch pedal is depressed.
The clutch itself is a pull type clutch. When the clutch pedal is depressed, the self-aligning release bearing is caused to slide on a guide pulling the center of the diaphragm spring.
The warped diaphragm spring disengages the pressure plate from the clutch disc. The clutch using a diaphragm spring has the advantage of little variation in push load even when the clutch disc facing is worn. The diaphragm spring is located inside the clutch cover.
The clutch has a clutch disc between the flywheel and the pressure plate.
Inside the clutch cover, there is a cover and a pressure plate combined with each other by means of strap plates, which also serve to prevent the pressure plate from relatively turning against to the clutch cover.