FixVault
Home › Subaru › 2004 › Forester X, Automatic › Repair and Diagnosis › Body & Frame › Door Locks › Security And Locks › Rear Gate Latch Assembly › Removal

Rear Gate Latch Assembly: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the rear gate trim. Refer to REMOVAL , Rear Gate Trim .
  3. Remove two bolts.
    Fig 1: Identifying Bolts
    G00935925Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the rear gate latch assembly, and then disconnect the connector.
  5. Remove the rear gate outer handle cable, and then remove the rear gate latch assembly.
About FixVault