FixVault
Home › Subaru › 2004 › Forester X, Automatic › Repair and Diagnosis › External Pages › Different car › Section 180 (Cruise Control System) › Neutral Position Switch › Removal

Neutral Position Switch: Removal

WARNING: This page is about a different car, the 2005 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Disconnect the connector from neutral position switch, and then remove the switch. < Ref. to Back-Up Light And Neutral Position Switch, REMOVAL , Switches And Harness. >
About FixVault