FixVault
Home › Subaru › 2004 › Forester XT, Standard › Repair and Diagnosis › Brakes › Traction Control › Abs (Diagnostics) › SUBARU Select Monitor › Operation › Clear Memory Mode

Clear Memory Mode

  1. On the << Main Menu >> display screen, select the {2. Each System Check} and press [YES] key.
  2. On the << System Select Menu >> display screen, select the {Brake System} and press [YES] key.
  3. Press the [YES] key after displayed the information of engine type.
  4. On the << Brake Control Diagnosis >> display screen, select the {Clear Memory} and press [YES] key.
    Fig 1: Subaru Select Monitor Display (Clear Memory Mode)
    G00959641Courtesy of SUBARU OF AMERICA, INC.
  5. When the "Done" and "turn ignition switch to OFF" are shown on display screen, turn the Subaru Select Monitor and ignition switch to OFF.
NOTE: For detailed operation procedure, refer to the OEM - GENERAL INFORMATION .
About FixVault