FixVault
Home › Subaru › 2004 › Impreza RS, Standard › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Security And Locks › Keyless Entry Control Module › Removal

Keyless Entry Control Module: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the instrument panel lower cover. Refer to REMOVAL .
  3. Remove the nut, and then remove the keyless entry control module while disconnecting connector.
    Fig 1: Removing Keyless Entry Control Module
    G00953875Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the keyless entry control module and other electrical control module.
About FixVault