FixVault
Home › Subaru › 2004 › Impreza RS, Standard › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Security And Locks › Security Control Module › Adjustment › Impact Sensitivity

Impact Sensitivity

NOTE: Before adjustment, make sure the security control module has been securely installed on the bracket.
  1. Remove the security control module. Refer to REMOVAL  Security Control Module
  2. Adjust the sensitivity adjust screw in the security control module.
    NOTE: After adjusting, be sure to plug the adjust screw hole.
    Fig 1: Adjusting Sensitivity Adjust Screw In Security Control Module
    G00953868Courtesy of SUBARU OF AMERICA, INC.
  3. Install the security control module.
  4. Perform the impact sensitivity test.
About FixVault