FixVault
Home › Subaru › 2004 › Impreza RS, Standard › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Security And Locks › Security Control Module › Removal › STi MODEL

STi MODEL

  1. Disconnect the ground cable from battery.
  2. Remove the glove box. Refer to REMOVAL .
    Fig 1: Removing Glove Box.
    G00953865Courtesy of SUBARU OF AMERICA, INC.
  3. Remove a bolt (A) and disconnect the connector, and then remove the security control module.
Fig 2: Removing Bolt And Security Control Module
G00953866Courtesy of SUBARU OF AMERICA, INC.
About FixVault