FixVault
Home › Subaru › 2004 › Outback Base, 4D Sedan › Repair and Diagnosis › Brakes › Traction Control › Abs (Diagnostics) › Subaru Select Monitor › Operation › Clear Memory Mode

Clear Memory Mode

  1. On the << Main Menu >> display screen, select the {2. Each System Check} and press the << YES >> key.
  2. On the << System Select Menu >> display screen, select {Brake System} and press the << YES >> key.
  3. Press the << YES >> key after displayed the information of ABS type.
  4. On the << Brake Control Diagnosis >> display screen, select the {Clear Memory} and press the << YES >> key.
    Fig 1: Clear Memory Mode Chart
    G00871363Courtesy of SUBARU OF AMERICA, INC.
  5. When the "Done" and "turn ignition switch OFF" are shown on the display screen, turn the Subaru Select Monitor and ignition switch to OFF.
NOTE: For detailed operation procedure, refer to the Subaru Select Monitor Operation Manual.
About FixVault