Service Data
Service Data
| Front and rear bearing preload at companion flange bolt hole N (kgf, lb) | T-type | 18.1 -- 38.8 (1.8 -- 4.0, 4.1 -- 8.7) |
| VA-type | 12.7 -- 32.4 (1.3 -- 3.3, 2.9 -- 7.3) | |
| Side gear backlash mm (in) | T-type | 0.10 -- 0.20 (0.0039 -- 0.0079) |
| VA-type | 0.05 -- 0.15 (0.0020 -- 0.0059) | |
| Side bearing standard width mm (in) | 20.00 (0.7874) | |
| Crown gear to drive pinion backlash mm (in) | T-type | 0.10 -- 0.20 (0.0039 -- 0.0079) |
| VA-type | 0.10 -- 0.15 (0.0039 -- 0.0059) | |
| Crown gear runout on its back surface mm (in) | T-type only | 0.05 (0.0020) or less |