FixVault
Home › Subaru › 2004 › Outback L.L. Bean Edition › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection (Fuel Systems) (H6DO) › Idle Air Control Solenoid Valve › Removal

Idle Air Control Solenoid Valve: Removal

  1. Disconnect ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G00897246Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect connector (A) from idle air control solenoid valve.
  3. Disconnect air by-pass hose (B) from idle air control solenoid valve.
  4. Remove idle air control solenoid valve from throttle body.
    Fig 2: Removing Idle Air Control Solenoid Valve
    G00897247Courtesy of SUBARU OF AMERICA, INC.
About FixVault