FixVault
Home › Subaru › 2004 › Outback VDC, 4D Wagon › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection (Fuel Systems) (H6DO) › Engine Coolant Temperature Sensor › Removal

Engine Coolant Temperature Sensor: Removal

  1. Disconnect ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G00897221Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect connector from engine coolant temperature sensor.
  3. Remove engine coolant temperature sensor.
    Fig 2: Removing Engine Coolant Temperature Sensor
    G00897222Courtesy of SUBARU OF AMERICA, INC.
About FixVault