FixVault
Home › Subaru › 2005 › Baja Base, Automatic › Repair and Diagnosis › External Pages › Different car › Section 40 (A/T & M/T Control Systems) › Select Lever › Inspection

Select Lever: Inspection

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the removed parts by comparing with new ones for deformation, damage and wear. Repair or replace if defective.
  2. Confirm the select lever operating condition before assembly. Normal if it operates smoothly.
About FixVault