Outer Mirror Assembly: Inspection

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Check that the rearview mirror moves properly when the battery voltage is applied to terminals.

Model with side turn signal light

SWITCH POSITION TERMINAL SPECIFICATION

Switch position	Terminal No.
OFF	-
UP	6 (+) and 3 (-) or 8 (-)
DOWN	3 (+) or 8 (+) and 6 (-)
LEFT	7 (+) and 3 (-) or 8 (-)
RIGHT	3 (+) or 8 (+) and 7 (-)

Model without side turn signal light

Fig 1: Model With Side Turn Signal Light Connector Terminal

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Model Without Side Turn Signal Light Connector Terminal

Courtesy of SUBARU OF AMERICA, INC.

SWITCH POSITION TERMINAL SPECIFICATION

Switch position	Terminal No.
OFF	-
UP	4 (+) and 2 (-) or 6 (-)
DOWN	2 (+) or 6 (+) and 4 (-)
LEFT	5 (+) and 6 (-) or 2 (-)
RIGHT	6 (+) or 2 (+) and 5 (-)

Replace the outer mirror assembly if defective.