FixVault
Home › Subaru › 2005 › Baja Base, Automatic › Repair and Diagnosis › External Pages › Different car › Section 68 (Glass/Windows/Mirrors) › Power Window Control Switch › Removal › Main Switch

Main Switch

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the front door trim. < Ref. to REMOVAL , Door Trim. >
  3. Disconnect the harness connector.
  4. Remove the screws from the reverse side of front door trim to remove the power window main switch.
    Fig 1: Removing Screws From Reverse Side Of Front Door Trim
    G03833664Courtesy of SUBARU OF AMERICA, INC.
About FixVault