FixVault
Home › Subaru › 2005 › Baja Base, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission Diagnostics (H4SO) › Subaru Select Monitor › Operation › Clear Memory Mode

Clear Memory Mode

  1. On the << Main Menu >> display screen, select the {2. Each System Check} and press the [YES] key.
  2. On the << System Selection Menu >> display screen, select the {Transmission Control System} and press the [YES] key.
  3. Press the [YES] key after the information of transmission type is displayed.
  4. On the << Transmission Diagnosis >> display screen, select the {Clear Memory} and press the [YES] key.
  5. When the "Done" and "Turn Ignition Switch OFF" are shown on display screen, turn the Subaru Select Monitor and ignition switch to OFF.
    NOTE: For detailed operation procedure, refer to the Subaru Select Monitor operation manual.
About FixVault