Section 13 (Starting/Charging Systems (H4SO)): Generator: Removal

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector and terminal from generator.
- 2.5L Non-turbo model (U5)
  
  Fig 2: Disconnecting Connector And Terminal From Generator - 2.5L Non-Turbo Model (U5)
  Courtesy of SUBARU OF AMERICA, INC.
- 2.5L Non-turbo model (Except for U5)
  
  Fig 3: Disconnecting Connector And Terminal From Generator - 2.5L Non-Turbo Model (Except For U5)
  Courtesy of SUBARU OF AMERICA, INC.
- 3.0L Non-turbo model
  
  Fig 4: Disconnecting Connector And Terminal From Generator - 3.0L Non-Turbo Model
  Courtesy of SUBARU OF AMERICA, INC.
- Turbo model
Fig 5: Disconnecting Connector And Terminal From Generator - Turbo Model
Courtesy of SUBARU OF AMERICA, INC.
Remove the V-belt covers.
Remove the V-belts.
< Ref. to REMOVAL , V-belt for (H4SO model), REMOVAL , V-belt for (H4DOTC model) or REMOVAL , V-belt for (H6DO model).
Remove the bolts which install the generator onto bracket.

Fig 6: Removing Bolts From Generator to Bracket

Courtesy of SUBARU OF AMERICA, INC.