FixVault
Home › Subaru › 2005 › Baja Base, Standard › Repair and Diagnosis › External Pages › Different car › Section 61 (Airbag System) › Front Sub Sensor › Removal

Front Sub Sensor: Removal

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to OFF.
  2. Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
  3. Remove the front bumper face. < Ref. to FRONT BUMPER FACE , REMOVAL, Front Bumper. >
  4. Remove the bolts, and then detach the front sub sensor.
    Fig 1: Detaching Front Sub Sensor
    G03833376Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector from front sub sensor.
About FixVault