FixVault
Home › Subaru › 2005 › Baja Base, Standard › Repair and Diagnosis › External Pages › Different car › Section 63 (Occupant Detection System (Diagnostics)) › Subaru Select Monitor › Operation › Sensor Data Output

Sensor Data Output

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the << Occupant Sensing System >> main menu display screen, select the {Sensor Data Output} and press the [YES] key.
    NOTE: Do not touch the vehicle within 20 seconds after pressing the [YES] key. Output value may be changed when sensing the pitching and vibration of the vehicle while reading sensor data output.
  2. Sensor output will be displayed in the (*****). Press the [YES] key to move to the main menu.
Fig 1: Displaying Sensor Output
G03833485Courtesy of SUBARU OF AMERICA, INC.
About FixVault