FixVault

Sedan Model

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Push the high-mounted stop light backward of the vehicle (1), raise the rear portion of it (2) and remove the clips to remove it.
    Fig 1: Pushing High-Mounted Stop Light Backward Of Vehicle, Raise Rear Portion
    G03833569Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the harness from clamp.
    Fig 2: Removing Harness From Clamp
    G03833570Courtesy of SUBARU OF AMERICA, INC.
  4. Disengage two claws (A), pull out the high-mounted stop light from the cover and remove the claw (B).
    Fig 3: Pulling Out High-Mounted Stop Light From Cover
    G03833571Courtesy of SUBARU OF AMERICA, INC.
  5. Disengage three claws and remove the lens (A).
    Fig 4: Disengaging Three Claws And Lens
    G03833572Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the bulb.