Ignition Key Lock: Replacement

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.
Remove the steering column. < Ref. to REMOVAL , Tilt Steering Column. >
Secure the steering column in a vise. Remove the bolt with a drill.

Fig 1: Removing Bolt With Drill
Courtesy of SUBARU OF AMERICA, INC.
Remove the ignition key lock.
Using a new bolt, tighten the bolts all the way.

Fig 2: Tightening Bolts

Courtesy of SUBARU OF AMERICA, INC.