FixVault
Home › Subaru › 2005 › Baja Base, Standard › Repair and Diagnosis › External Pages › Different car › Section 71 (Security And Locks) › Key Lock Cylinders › Replacement

Key Lock Cylinders: Replacement

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the front door glass to the top position.
  2. Remove the door trim. < Ref. to REMOVAL , Door Trim. >
  3. Remove the sealing cover.
  4. Remove the rod clamp. Remove the bolt. Replace the key cylinder (1).
Fig 1: Removing Rod Clamp
G03833909Courtesy of SUBARU OF AMERICA, INC.
About FixVault