Read Current Data: Operation

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

On the << Main Menu >> display screen, select the {Each System Check} and press the [YES] key.
On the << System Selection Menu >> display screen, select the {Integ. Unit mode} and press the [YES] key.
On the << Integ. Unit mode failure diag >> display screen, select the {Current Data Display & Save} and press the [YES] key.
On the << Data Display Menu >> screen, select the {12 Data Display} and press the [YES] key.
Using the scroll key, scroll the display screen up or down until the desired data is shown.
< Ref. to , DISPLAY OF ANALOG DATA , OPERATION, Subaru Select Monitor.> < Ref. to , DISPLAY OF ON/OFF DATA , OPERATION, Subaru Select Monitor.> < Ref. to , CONFIRMATION OF CURRENT SETTING , OPERATION, Subaru Select Monitor.>