FixVault
Home › Subaru › 2005 › Baja Base, Standard › Repair and Diagnosis › External Pages › Different car › Section 76 (LAN System (Diagnostics)) › Subaru Select Monitor › Operation › Clear Memory Mode

Clear Memory Mode

WARNING: This page is about a different car, the 2005 Subaru Outback and 2005 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the << Main Menu >> display screen, select the {2. Each System Check} and press the [YES] key.
  2. On the << System Selection Menu >> display screen, select the {Integ. Unit mode} and press the [YES] key.
  3. Press [YES] key after displayed the information of body integrated unit type.
  4. On the << Integ. Unit mode failure diag >> display screen, select the {Clear Memory} and press the [YES] key.
    REFERENCE CHART

    Display Contents to be monitored
    Clear memory? Clear function of DTC and freeze frame data
  5. When the "Done" are shown on the display screen, turn the ignition switch to OFF.
NOTE: For detailed operation procedure, refer to "SUBARU SELECT MONITOR OPERATION MANUAL".
About FixVault