Read Current Data
- On the << Main Menu >> display screen, select the {Each System Check} and press the [YES] key.
- On the << System Selection Menu >> display screen, select the {Brake Control} and press the [YES] key.
- Press the [YES] key after the VDC type is displayed.
- On the << Brake Control Diagnosis >> screen, select the {Current Data Display/Save}, and then press the [YES] key.
- On the << Data Display Menu >> screen, select the {Data Display} and press the [YES] key.
- Using the scroll key, scroll the display screen up or down until the desired data is shown.
- A list of support data is shown in SUPPORT DATA LIST .
SUPPORT DATA LIST
| Display | Contents to be monitored | Unit of measure |
|---|---|---|
| FR Wheel Speed | Wheel speed detected by front ABS wheel speed sensor RH is displayed. | km/h |
| FL Wheel Speed | Wheel speed detected by front ABS wheel speed sensor LH is displayed. | km/h |
| RR Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor RH is displayed. | km/h |
| RL Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor LH is displayed. | km/h |
| Steering Angle Sensor | Steering wheel angle that detected by steering angle sensor is displayed. | deg |
| Yaw Rate Sensor | Vehicle angular speed detected by yaw rate sensor is displayed. | deg/s |
| Pressure Sensor (P) | Brake fluid pressure detected by primary pressure sensor is displayed. | bar |
| Pressure Sensor (S) | Brake fluid pressure detected by secondary pressure sensor is displayed. | bar |
| Lateral G Sensor | Acceleration in lateral direction detected by lateral G sensor is displayed. | m/s2 |
| IG Power Supply Voltage | Voltage supplied to VDCCM is displayed. | V |
| Valve Relay | Valve relay operating condition is displayed. | ON or OFF |
| Motor Relay | Motor relay operating condition is displayed. | ON or OFF |
| Motor Relay | Monitor Motor relay operating condition is displayed. | ON or OFF |
| VDC ON | VDC operation condition is displayed. | ON or OFF |
| VDC Warning Light | ON/OFF state of VDC warning light/VDC OFF indicator light is displayed. (ON displayed when VDC is faulty.) | ON or OFF |
| ABS Warning Light | ON/OFF state of ABS warning light is displayed. | ON or OFF |
| VDC OFF Light | ON/OFF state of VDC warning light/VDC OFF indicator light is displayed. (ON/OFF displayed by operating VDC OFF switch and EAM signal.) | ON or OFF |
| EBD Warning Light | ON/OFF state of EBD warning light is displayed. | ON or OFF |
| EAM Signal | Engine control command signal is displayed. | 1 or 0 |
| PATA Signal | ON/OFF state of VDC OFF switch is displayed. | ON or OFF |
| Gear Position | Gear position is displayed in number. 0: N or P, 1: 1st, 2: 2nd, 3: 3rd, 4: 4th, 7: R | - |
| Engine Speed | Engine speed is displayed. | RPM |
| PW Signal | Acceleration opening is displayed. | % |
| Car Line | Type of vehicle is displayed in number. "1" for normal. | - |
NOTE:
For details concerning operation procedure, refer to "SUBARU SELECT MONITOR OPERATION MANUAL".