FixVault
Home › Subaru › 2005 › Forester XT, Automatic › Repair and Diagnosis › Body & Frame › Door Locks › Security And Locks › Keyless Entry Control Unit › Removal

Keyless Entry Control Unit: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the glove box. < Ref. to REMOVAL , Glove Box. >
  3. Remove the nut, and then remove the keyless entry control unit while disconnecting connector.
    Fig 1: Removing The Nut, And Keyless Entry Control Unit While Disconnecting Connector
    G03809416Courtesy of SUBARU OF AMERICA, INC.
About FixVault