Check Door Switch

CHECKING DOOR SWITCH

Step	Check	Yes	No
1 : CHECK DOOR SWITCH CIRCUIT. Measure the voltage between the security control unit harness connector terminal and chassis ground. Connector & terminal Front and rear door: (B93) No. 5 (+) - chassis ground (-): Rear gate: (B93) No. 4 (+) - chassis ground (-):	Is the voltage 0 V when any door or rear gate is opened?	Go to step 2.	Go to step 3 .
2 : CHECK DOOR SWITCH CIRCUIT. Measure the voltage between the security control unit harness connector terminal and chassis ground. Connector & terminal Front and rear door: (B93) No. 5 (+) - chassis ground (-): Rear gate: (B93) No. 4 (+) - chassis ground (-):	Is the voltage more than 10 V when any door and rear gate are closed?	The door switch is OK.	Go to step 3 .
3 : CHECK DOOR SWITCH. Disconnect the door switch harness connector. Measure the resistance between the door switch terminals. Terminal Door switch No. 1 - No. 3: Rear gate latch switch No. 1 - No. 2:	Is the resistance more than 1 Mohm when door switch is pushed?	Go to step 4.	Replace the door switch.
4 : CHECK DOOR SWITCH. Measure the resistance between the door switch terminals. Terminal Door switch No. 1 - No. 3: Rear gate latch switch No. 1 - No. 2:	Is the resistance less than 1 ohm when door switch is released?	Check the harness for open circuits and shorts between the security control unit and door switch.	Replace the door switch.