FixVault
Home › Subaru › 2005 › Forester XT, Standard › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake Control System - Vehicle Dynamics Control (VDC) › VDC Sequence Control › Operation › VDC Sequence Control With SUBARU Select Monitor

VDC Sequence Control With SUBARU Select Monitor

  1. Connect the Subaru Select Monitor to data link connector beside driver's seat instrument panel lower cover.
  2. Turn the ignition switch to ON.
  3. Turn the Subaru Select Monitor switch to ON.
  4. Put the Subaru Select Monitor to "BRAKE CONTROL" mode.
  5. Select the "VDC Check Mode" in {Function check sequence} menu to start 'VDC sequence control'.
  6. When the message "Press YES" is displayed, press << YES >> key.
  7. Operation points will be displayed on the Subaru Select Monitor.
About FixVault