MT Gear Shift Lever: Disassembly: 6MT

Remove the spring pin from slider.

Fig 1: Removing Spring Pin From Slider
Courtesy of SUBARU OF AMERICA, INC.
Remove the slider and spring.

Fig 2: Removing Slider And Spring
Courtesy of SUBARU OF AMERICA, INC.
Cut the band clip.

Fig 3: Cutting Band Clip
Courtesy of SUBARU OF AMERICA, INC.
Remove the reverse check cable from cable plate.

Fig 4: Removing Reverse Check Cable From Cable Plate
Courtesy of SUBARU OF AMERICA, INC.
Remove the reverse check cable from gear shift assembly.

Fig 5: Removing Reverse Check Cable From Gear Shift Assembly
Courtesy of SUBARU OF AMERICA, INC.
Remove the holder and spring seat.

Fig 6: Removing Holder And Spring Seat
Courtesy of SUBARU OF AMERICA, INC.
Disassemble the lock wire.
NOTE: Do not reuse the lock wire.

Fig 7: Identifying Lock Wire
Courtesy of SUBARU OF AMERICA, INC.
Remove the boss from rod.

Fig 8: Removing Boss From Rod
Courtesy of SUBARU OF AMERICA, INC.
Remove the rod from lever.

Fig 9: Removing Rod From Lever
Courtesy of SUBARU OF AMERICA, INC.
Separate the rod and inner boot.
Remove the snap ring from stay.

Fig 10: Removing Snap Ring From Stay
Courtesy of SUBARU OF AMERICA, INC.
Separate the gear shift lever and stay.

Fig 11: Separating Gear Shift Lever And Stay
Courtesy of SUBARU OF AMERICA, INC.
Remove the boot and bushing from gear shift lever.

Fig 12: Removing Boot And Bushing
Courtesy of SUBARU OF AMERICA, INC.
Remove the spring pin, and then remove the bushing and snap ring.

Fig 13: Removing Spring Pin
Courtesy of SUBARU OF AMERICA, INC.
Remove the bushing and spacer from boss.

Fig 14: Removing Bushing And Spacer From Boss
Courtesy of SUBARU OF AMERICA, INC.
Remove the bushing and cushion rubber from stay.

Fig 15: Removing Bushing And Cushion Rubber From Stay
Courtesy of SUBARU OF AMERICA, INC.