Data Link Connector: Note

This connector is used for both OBD-II general scan tool and Subaru Select Monitor.

CAUTION: Do not connect any scan tools except for OBD-II general scan tool and Subaru Select Monitor, because the circuit for Subaru Select Monitor may be damaged.

Fig 1: Identifying Data Link Connector

Courtesy of SUBARU OF AMERICA, INC.

TERMINAL DESCRIPTION

Terminal No.	Remarks	Terminal No.	Remarks
1	Power supply	9	Empty
2	Empty	10	Subaru Select Monitor signal
3	Empty	11	Empty
4	Empty	12	Ground
5	Empty	13	Ground
6	Empty	14	Empty
7	Empty	15	Empty
8	Empty	16	Empty