FixVault
Home › Subaru › 2005 › Outback R › Repair and Diagnosis › Accessories & Equipment › Headlights › Lighting System › Combination Base Switch Assembly › Removal

Combination Base Switch Assembly: Removal

  1. Remove the driver's airbag module. < Ref. to REMOVAL , Driver's Airbag Module. >
  2. Remove the steering wheel. < Ref. to REMOVAL , Steering Wheel. >
  3. Remove the screws and remove the steering column lower cover.
    Fig 1: Removing Screws And Steering Column Lower Cover
    G03833534Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the combination switch. < Ref. to , REMOVAL , Combination Switch (Light).> < Ref. to REMOVAL , Combination Switch (Wiper). >
  5. Remove the four screws and remove the roll connector.
  6. Remove the three screws.
    Fig 2: Removing Three Screws
    G03833535Courtesy of SUBARU OF AMERICA, INC.
  7. Disconnect the connector and remove the combination base switch assembly.
About FixVault