VDC Sequence Control With SUBARU Select Monitor
NOTE:
In the event of any trouble, the sequence control may not be operative.
- Connect the Subaru Select Monitor to data link connector under the driver's side instrument panel lower cover.
- Turn the ignition switch to ON.
- Set the Subaru Select Monitor switch to ON.
- Set the Subaru Select Monitor to the "Brake Control" mode.
- When the "VDC Inspection Mode" is selected from the "Function check sequence" menu, the "VDC sequence control" will start.
- Since "Press the [YES] key" is displayed, press the YES key.
- Operation points will be displayed on the Subaru Select Monitor.