FixVault
Home › Subaru › 2005 › Outback R › Repair and Diagnosis › Electrical › Gauges › Instrumentation/Driver Info › Clock System › Inspection › Check Illumination Circuit

Check Illumination Circuit

ILLUMINATION CIRCUIT SPECIFICATION

Step Check Yes No
1. CHECK ILLUMINATION CIRCUIT POWER SUPPLY. 
  1. Turn the ignition switch to OFF.
  2. Disconnect the clock harness connector.
  3. Turn the ignition switch and lighting switch to ON.
  4. Measure the voltage between clock harness connector and chassis ground.

    Connector & terminal 

    (i59) No. 1 (+) - Chassis ground (-): 

 Is the voltage more than 10 V? Replace the clock body. Check the harness for open or short between fuse and clock.
About FixVault