FixVault

Section 10 (Cooling System (H4SO)): General Description: Specifications

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
COOLING SYSTEM SPECIFICATIONS

Cooling system Electric fan + Forced engine coolant circulation system
Total engine coolant capacity l (US qt, Imp qt) MT: Approx. 6.8 (7.2, 6.0)
AT: Approx. 6.7 (7.1,5.9)
Water pump Type Centrifugal impeller type
Discharge performance I Discharge 18 l (4.8 US gal, 4.0 Imp gal)/min.
Pump speed - pressure leak 1,000 rpm - 7 kPa (0.7 mAq, 2.3 ftAq)
Engine coolant temperature 80°C (176°F)
Discharge performance II Discharge 70 l (18.5 US gal, 15.4 Imp gal)/min.
Pump speed - pressure leak 3,000 rpm - 55 kPa (5.6 mAq, 18.4 ftAq)
Engine coolant temperature 80°C (176°F)
Discharge performance III Discharge 153 l (40.4 US gal, 33.7 Imp gal)/min.
Pump speed - pressure leak 6,000 rpm - 217 kPa (22.1 mAq, 72.5 ftAq)
Engine coolant temperature 80°C (176°F)
Impeller diameter 74 mm (2.91 in)
Number of impeller vanes 8
Pump pulley diameter 60 mm (2.36 in)
Clearance between impeller and case Standard 0.4 - 1.6 mm (0.016 - 0.063 in)
Thermostat Type Wax pellet type
Starts to open 76 - 80°C (169 - 176°F)
Fully opened 91°C (196°F)
Valve lift 9.0 mm (0.354 in) or more
Valve opening bore 35 mm (1.38 in)
Radiator fan Motor 75 W (main fan)
75 W (sub fan)
Fan diameter x Blade 300 mm (11.81 in) x 5 (main fan)
300 mm (11.81 in) x 4 (sub fan)
Radiator Type Down flow, pressure type
Core dimensions 691.5 x 340 x 16 mm (27.22 x 13.39 x 0.63 in)
Cap valve opening pressure Above: 108+/-15 kPa (1.1 +/-0.15 kg/cm2 , 16+/-2 psi)
Below:-1.0 to-4.9 kPa (-0.01 to -0.05 kg/cm2 , -0.1 to -0.7 psi)
Fins Corrugated fin type
Reservoir tank Capacity 0.5 l (0.5 US qt, 0.4 Imp qt)