FixVault

Section 14 (Starting/Charging Systems (H4SO)): Generator: Removal

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G03748788Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the connector and terminal from generator.
    Fig 2: Disconnecting Connector And Terminal From Generator
    G03748789Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the V-belt cover.
    Fig 3: Removing V-Belt Cover
    G03748790Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the front side V-belt.

    < Ref. to FRONT SIDE BELT , REMOVAL, V-belt. > or < Ref. to FRONT SIDE BELT , REMOVAL, V-belt. >

  5. Remove the bolts which install generator onto bracket.
    Fig 4: Installing Generator Onto Bracket
    G03748791Courtesy of SUBARU OF AMERICA, INC.