MPT Model

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Set the select lever to "P" range.
Using a plastic hammer, install reduction driven gear assembly and new washer, and tighten new drive pinion lock nut.
Tightening torque:

100 N.m (10.2 kgf-m, 73.8 ft-lb)

Fig 1: Installing Drive Pinion Lock Nut - MPT Model
Courtesy of SUBARU OF AMERICA, INC.
After tightening, stake the lock nut securely.
Combine the transmission case with the extension case, and install rear vehicle speed sensor. < Ref. to , INSTALLATION . >
Install the transmission assembly to vehicle. < Ref. to , INSTALLATION . >