FixVault
Home › Subaru › 2005 › Outback R › Repair and Diagnosis › External Pages › Different car › Section 43 (Power Assisted System (Power Steering)) › Tilt Steering Column › Assembly

Tilt Steering Column: Assembly

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert combination switch to upper column shaft, and install upper column cover. Then route ignition key harness and combination switch harness between column cover mounting bosses.

    Tightening torque: 

    1.2 N.m (0.12 kgf-m, 0.9 ft-lb) 

    CAUTION: Don't overtorque screw.
About FixVault