Throttle Position Sensor: Removal

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Disconnect connector from throttle position sensor.

Fig 2: Disconnecting Connector From Throttle Position Sensor
Courtesy of SUBARU OF AMERICA, INC.
Remove throttle position sensor holding screws, and remove it.

Fig 3: Removing Throttle Position Sensor Holding Screws
Courtesy of SUBARU OF AMERICA, INC.