FixVault
Home › Subaru › 2005 › Outback R › Repair and Diagnosis › External Pages › Different car › Section 52 (Security And Locks) › Security Control Module › Removal

Security Control Module: Removal

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove front cover (A).
  3. Remove screws (B) and then detach center panel (C) while disconnecting connector.
    Fig 1: Detaching Center Panel
    G03752491Courtesy of SUBARU OF AMERICA, INC.
  4. Remove two screws.
    NOTE: Before removing the screw, apply a few turns of butyl tape to the tip of the service tool. This prevents the screw from falling during removal.
    Fig 2: Removing Screws
    G03752492Courtesy of SUBARU OF AMERICA, INC.
  5. Remove radio and security control module together while disconnecting connector. < Ref. to REMOVAL . >
About FixVault