FixVault

Check Battery Disconnect Protection

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the key from the ignition switch.
  2. Close all the doors, rear gate and trunk lid.
  3. Open the front hood.
  4. Press the LOCK/ARM button of the transmitter.
  5. Disconnect the ground cable from the battery.
  6. Reconnect the cable to the battery.
  7. Check that the security indicator light blinks after reconnecting the battery cable.

    If NG, replace the security control module.