LH Side

WARNING: This page is about a different car, the 2005 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE: Replace O-rings with new ones.

Fig 1: Replacing O-Rings (LH Side)

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

5.0 N.m (0.51 kgf-m, 3.7 ft-lb)

Fig 2: Tightening Bolt Holding Fuel Pipe On Left Side Intake Manifold (LH Side)

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

19 N.m (1.9 kgf-m, 13.7 ft-lb)

Fig 3: Tightening Bolt Holding Injector Pipe To Intake Manifold (LH Side)

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque:

19 N.m (1.9 kgf-m, 13.7 ft-lb)

Fig 4: Installing Fuel Pipe Protector LH

Courtesy of SUBARU OF AMERICA, INC.