Read Freeze Frame Data For Engine (OBD Mode)
- On the << Main Menu>> display screen, select the {Each System Check} and press the [YES] key.
- On the << System Selection Menu>> display screen, select the {Engine} and press the [YES] key.
- Press the [YES] key after the information of engine type has been displayed.
- On the << Engine Diagnosis>> display screen, select the {OBD System} and press the [YES] key.
- On the << OBD Menu>> display screen, select the {Freeze Frame Data} and press the [YES] key.
- A list of the support data is shown in READ FREEZE FRAME DATA (OBD MODE)
.READ FREEZE FRAME DATA (OBD MODE)
DESCRIPTION Display Unit of measure DTC of freeze frame data Freeze frame data DTC Air fuel ratio control system for bank 1 Fuel system for Bank 1 - Engine load data Engine Load % Engine coolant temperature signal Coolant Temp. °C or °F Short term fuel trim by front oxygen (A/F) sensor (bank 1) Short term fuel trim B1 % Long term fuel trim by front oxygen (A/F) sensor (bank 1) Long term fuel trim B1 % Intake manifold absolute pressure signal Mani. Absolute Pressure mmHg, kPa, inHg or psi Engine speed signal Engine Speed rpm Vehicle speed signal Vehicle Speed km/h or MPH Ignition timing #1 Ignition timing adv. #1 ° Intake air temperature Intake Air Temp. °C Amount of intake air Mass Air Flow g/s Throttle valve angle Throttle Opening Angle %
NOTE:
For detailed operation procedures, refer to the SUBARU SELECT MONITOR OPERATION MANUAL .