Electrical Specification
ENGINE CONTROL MODULE CONNECTOR TERMINALS VOLTAGE SPECIFICATION
| Description | Connector No. | Terminal No. | Signal (V) | NOTE | ||
|---|---|---|---|---|---|---|
| Ignition SW ON (engine OFF) | Engine ON (idling) | |||||
| Brake vacuum sensor | Signal | B134 | 27 | 1 - 3.8 | 1 - 3.8 | - |
| Power supply | B135 | 22 | 5 | 5 | - | |
| Ground | B135 | 30 | 0 | 0 | - | |
| Self-shutoff control | B136 | 23 | 0 | 0 | - | |
| Brake vacuum pump | Relay drive | B136 | 8 | 10 - 13 (When the pump is OFF) |
12 - 14 (When the pump is ON) |
- |
| 0 (When the pump is ON) | 0 (When the pump is ON) | |||||
| Electric load | B135 | 25 | 0 (When the pump is OFF) | 0 (When the pump is OFF) | - | |
| 10 - 13 (When the pump is ON) |
12 - 14 (When the pump is ON) |
|||||
| SSM communication line | B136 | 16 | 1 or less ←→ 4 or more | 1 or less ←→ 4 or more | - | |