FixVault
Home › Subaru › 2006 › B9 Tribeca Base › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake Control System - Brake Vacuum Control (BVC) (Diagnostics) › Subaru Select Monitor › Operation › Clear Memory Mode

Clear Memory Mode

  1. On the «Main Menu» display screen, select the {Each System Check} and press the [YES] key.
  2. On the «System Selection Menu» display screen, select the {Brake Negative Pressure Pump System} and press the [YES] key.
  3. Press the [YES] key after the {3.0 DOHC} is displayed.
  4. On the «Negative Pressure Pump Diagnosis Menu» display screen, select the {Clear Memory} and press the [YES] key.
    DISPLAY CONTENT

    Display Contents to be monitored
    Clear Memory? DTC deleting function
  5. When "Done" and "Turn ignition switch OFF" are shown on the display screen, turn the Subaru Select Monitor and ignition switch to OFF.
    NOTE: For details concerning operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL ".
About FixVault