Read Current Data
- On the «Main Menu» display screen, select the {Each System Check} and press the [YES] key.
- On the «System Selection Menu» display screen, select the {Brake Control} and press the [YES] key.
- Press the [YES] key after {VDC AWD AT} is displayed.
- On the «Brake Control Diagnosis» display screen, select the {Current Data Display/Save}, and then press the [YES] key.
- On the «Display Menu» screen, select the data display method and press the [YES] key.
- Using a scroll key, scroll the display screen up or down until necessary data is shown.
- A list of the support data is shown in the following table.
LIST OF SUPPORT DATA
| Display | Contents to be monitored | Unit of measure |
|---|---|---|
| FR Wheel Speed | Wheel speed detected by front ABS wheel speed sensor RH is displayed. | km/h or MPH |
| FL Wheel Speed | Wheel speed detected by front ABS wheel speed sensor LH is displayed. | km/h or MPH |
| RR Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor RH is displayed. | km/h or MPH |
| RL Wheel Speed | Wheel speed detected by rear ABS wheel speed sensor LH is displayed. | km/h or MPH |
| Front/Rear G Sensor | Vehicle front/rear acceleration detected by G sensor is displayed. | m/s2 |
| Lateral G Sensor | Vehicle lateral acceleration detected by G sensor is displayed. | m/s2 |
| IG power supply voltage | Voltage supplied to VDCCM&H/U is displayed. | V |
| Steering Angle Sensor | Steering angle detected by steering angle sensor is displayed. | deg |
| Yaw Rate Sensor | Vehicle angular speed detected by yaw rate sensor is displayed. | deg/s |
| Pressure Sensor | Brake fluid pressure detected by pressure sensor is displayed. | bar |
| ABS Control Flag | ABS control condition is displayed. | ON or OFF |
| EBD Control Flag | EBD control condition is displayed. | ON or OFF |
| Brake Switch | Brake ON/OFF is displayed. | ON or OFF |
| ABS Warning Light | ON operation of the ABS warning light is displayed. | ON or OFF |
| EBD Warning Light | ON operation of the EBD warning light is displayed. | ON or OFF |
| Motor Relay Signal | Motor relay operation signal is displayed. | ON or OFF |
| Motor Relay Monitor | Motor relay monitor signal is displayed. | ON or OFF |
| TCS Control Flag | TCS control condition is displayed. | ON or OFF |
| Valve Relay Signal | Valve relay operation signal is displayed. | ON or OFF |
| VDC Control Flag | VDC control condition is displayed. | ON or OFF |
| VDC Warning Light | ON operation of the VDC warning light is displayed. | ON or OFF |
| OFF Light | ON/OFF condition of TCS OFF indicator light is displayed. | ON or OFF |
| E/G Control Prohibited Flag | Engine control command signal is displayed. | 1 or 0 |
| OFF Switch Signal | Operation condition of TCS OFF switch is displayed. | ON or OFF |
| Motor Fail Safe Relay Drive Signal | Motor fail safe relay drive signal is displayed. | ON or OFF |
NOTE:
For details concerning operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL ".