FixVault
Home › Subaru › 2006 › B9 Tribeca Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection (Fuel Systems) (H6DO) › Engine Coolant Temperature Sensor › Removal

Engine Coolant Temperature Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
  3. Disconnect the connectors from the engine coolant temperature sensor.
  4. Remove the engine coolant temperature sensor.
    Fig 1: Locating Engine Coolant Temperature Sensor Connector
    G05018435Courtesy of SUBARU OF AMERICA, INC.
About FixVault