Intake Manifold: Disassembly

Remove the engine harness from intake manifold.
Remove the throttle body. < Refer to REMOVAL , THROTTLE BODY. >
Remove the manifold absolute pressure sensor. < Refer to REMOVAL , MANIFOLD ABSOLUTE PRESSURE SENSOR. >
Remove the purge control solenoid valve. < Refer to REMOVAL , Purge Control Solenoid Valve. >
Loosen the clamp which holds fuel injector pipe to fuel hose, and then disconnect the pipe from fuel hose.

Fig 1: Locating Fuel Injector Pipe Clamp
Courtesy of SUBARU OF AMERICA, INC.
Remove the bolts which install fuel pipes on intake manifold.

Fig 2: Locating Fuel Pipes Bolts (1 Of 2)
Courtesy of SUBARU OF AMERICA, INC.

Fig 3: Locating Fuel Pipes Bolts (2 Of 2)
Courtesy of SUBARU OF AMERICA, INC.