FixVault
Home › Subaru › 2006 › B9 Tribeca Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection (Fuel Systems) (H6DO) › Knock Sensor › Removal

Knock Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
  3. Remove the intake manifold. < Refer to REMOVAL , INTAKE MANIFOLD. >
  4. Disconnect the knock sensor connector.
  5. Remove the knock sensor from cylinder block.
    Fig 1: Locating Knock Sensor
    G05018446Courtesy of SUBARU OF AMERICA, INC.
About FixVault