FixVault
Home › Subaru › 2006 › B9 Tribeca Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection (Fuel Systems) (H6DO) › Oil Temperature Sensor › Removal

Oil Temperature Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
  3. Remove the air intake chamber. < Refer to REMOVAL , Air Intake Chamber. >
  4. Disconnect the connector from oil temperature sensor.
  5. Remove the oil temperature sensor.
    Fig 1: Locating Oil Temperature Sensor Connector
    G05018469Courtesy of SUBARU OF AMERICA, INC.
About FixVault