FixVault
Home › Subaru › 2006 › B9 Tribeca Base › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission 5AT › Oil Pump Cover › Installation

Oil Pump Cover: Installation

  1. Secure the oil pump cover.

    Tightening torque: 41 N.m (4.2 kgf-m, 30.4 ft-lb) 

    Fig 1: Identifying Oil Pump Cover Mounting Bolt
    G05022338Courtesy of SUBARU OF AMERICA, INC.
  2. Install the converter case assembly to the transmission case assembly. < Refer to INSTALLATION , TORQUE CONVERTER ASSEMBLY. >
  3. Install the transmission harness connector to the stay.
  4. Install the ATF filter pipe. < Refer to INSTALLATION , ATF COOLER PIPE & HOSE. >
  5. Install the oil charge pipe together with an O-ring. < Refer to INSTALLATION , Oil Charge Pipe. >
  6. Install the torque converter assembly. < Refer to INSTALLATION , TORQUE CONVERTER ASSEMBLY. >
  7. Install the transmission assembly to the vehicle. < Refer to INSTALLATION , AUTOMATIC TRANSMISSION ASSEMBLY. >
About FixVault